The OptiLogix HyperXpress OEM Voice Recording boards provide powerful features for building advanced Digital Voice Recorders.
Each card occupies a single PCI Express slot and combines a compact form factor with very low power consumption resulting in unmatched reliability.
On-board DSPs and large streaming buffers impose very little demand on system and application resources.
D-channel signalling supports Call Setup, Connect, Clear, DDI number and CLI number decoding.
Supports all major ISDN variants, Q.SIG, DASS-2, DPNSS and various PBX Digital handset D-channel protocols.
Simultaneous recording on all channels of both upstream and downstream sides of a conversation.
Features and Benefits
- High density half length PCI Express card
- Fits in every x1, x2, x4, x8 and x16 PCIe slot
- Non intrusive and undetectable high impedance passive monitoring
- Dialled number and Caller ID signalling support
- Digital Signal Processors for voice streaming and on-board D-channel protocol processing
- Models for PRI-ISDN, T1-ISDN, BRI-ISDN, Digital handsets and Analog handset / trunk lines
- 8 channel and 16 channel Analog, Digital handset and So bus models
- Fractional, 30 channel and 60 channel PRI-ISDN / E1 models
- 23 channel and 46 channel T1-ISDN models
- Protocol support for all major ISDN variants, Q.SIG, DASS-2 and DPNSS.
- Analog models support DTMF, FSK Caller ID, AGC and speech detection
- Digital models support all major PBX with highly accurate DigitalVox start/stop triggering and D-channel support for various PBX
- Accurate DigitalVox start/stop triggering for non-protocol E1/T1 PCM applications
- Based on the OptiLogix V32 DSP architecture for unmatched performance and reliability
- Uses the OptiLogix generic API and driver
- Supports Win-NT, Win-2000, Win-XP, Win-2003, Vista, Server 2008 and Windows 7
- Driver support for all 32-bit and 64-bit Windows versions
- 64kbit/s A-law and high quality compressed 36kbit/s speech encoding
- Supports writing of directly playable WAV files to disk
- CE, FCC and RoHS compliance
Board model examples
| 16 channel Analog: |
HX-HS-16 |
| 16 channel Digital / So: |
HX-DX-16 |
| 30 channel PRI / E1: |
HX-PRI-30 |
| 60 channel PRI / E1: |
HX-PRI-60 |
Technical Specifications
| Mechanical characteristics: | Half length PCI Express card |
| Operating temperature: | 0 ºC to +60 ºC |
| Humidity: | 5% to 80% non-condensing |
| Maximum power requirements: | +3,3Vdc (300 mA), +12Vdc (150 mA) |
| Operating systems supported: | All 32-bit and 64-bit Windows Operating Systems |
| Boards per system: | Mix of 12 boards or 720 ports total |
Interface Specifications
| Primary Rate interface: | E1 (2.048Mbit/s), T1 (1.544Mbit/s) |
| AC impedance: | 1100 Ω |
| Maximum tap length: | 10 m (unterminated), 100 m (terminated) |
| Protocols: | All major ISDN variants, Q.SIG, DASS-2, DPNSS |
| | |
| Basic Rate interface: | 4 wire So bus |
| AC impedance: | Line Matched |
| Maximum tap length: | 500 m |
| Protocols: | Euro-ISDN |
| | |
| Digital handset interface: | 2 wire bus |
| AC impedance: | Line Matched |
| Maximum tap length: | 500 m |
| Protocols: | All major PBX supported (DigitalVox triggering) and D-channel support for various PBX |
| | |
| Analog handset / trunk interface: | 2 wire voltage/loop start or line level audio |
| DC/AC impedance: | Infinite / 3000 Ω |
| Maximum tap length: | 5000 m |
| Signalling: | Ring detection, loop current or voltage detection, DTMF detection for dialled numbers, FSK Caller ID detection, voice activity detection |
Audio Processing
| Voice and Silence detection: | Programmable from OptiLogix API |
| Upstream and downstream audio gain: | Programmable from OptiLogix API |
| Frequency response: | 300-3400Hz (all compression modes) |
| Speech encoding/compression: | 64kbit/s A-law (G.711), 36kbit/s proprietary encoding |
Safety and EMI Certifications
| Safety, emissions, immunity: | EN 60950, EN 55022, EN 55024 |
| Estimated MTBF: | 600.000 hours |
| Warranty: | 3 years |
